Programming the ADT Safewatch 3000, not a problem, you have found the right place. If you have the ADT Safewatch Pro, you may want to add on sensors to it. You need to know how to program the ADT Safewatch Pro. Sure your one option is to call ADT and ask them. They will gladly install anything for you if they renew your contract and charge you a lot of money. If you want to try to install your own sensors, then it can be a bit difficult to figure out where to start. The Safewatch Pro is put out by ADT and so they don’t want to give you the installation manual. I have found that the system is of this type of alarm system is a Vista 15 or Vista 20 type.
programming the ADT Safewatch 3000 – Step 1
You can find installation manuals here for the Vista 15 which should be similar to the Safewatch Pro 3000. This should help you greatly in programming the ADT Safewatch 3000
Go through the manual and try a few options on your system. Whenever I program my alarm, I make a note of all the current settings on the alarm system as I am programming it. If you want to go back to something you already had, then its best to have that written down. Have someone help you if you need it to write down your configuration while you are working.